KAM KCA-600 Power Amplifier
KCAAmps
  • High Quality Affordable Amplification
  • 2 x 300w Max, 2 x 150w RMS @ 4 Ohms
  • Vented Front Panel with Forced Fan Cooling
  • Thermal Protection Relay
  • Balanced XLR Audio Inputs
  • Unbalanced Jack and RCA Audio Inputs
  • Speakon and Binding Post Speaker Outputs
  • Bridge Mode Operation
  • S/N Ratio : 84dB
  • Approx. Weight : 6.5 Kgs

Stageline STA-500 Power Amplifier
Stageline_STA500_Amplifier
::: Introductory Offer - Limited Stock :::
  • 2U Power Amplifier
  • 2 x 200w RMS @ 4 Ohms
  • 600w Max Power
  • Fan-cooling
  • Speaker Switch-on Delay
  • Short Circuit Protection
  • Protections Against Overheating
  • LED Clip Indicators on each channel
  • Dimensions : 482 x 95 x 300mm
  • 1/4" Jack and RCA Inputs
  • Speakon, 1/4" Jack and Binding Post Outputs
  • Approx. Weight : 9.3 Kg

Stageline STA-700 Power Amplifier
Stageline_STA700_Amplifier
::: Introductory Offer - Limited Stock :::
  • 2U Power Amplifier
  • 2 x 275w RMS @ 4 Ohms
  • 800w Max Power
  • Fan-cooling
  • Speaker Switch-on Delay
  • Short Circuit Protection
  • Protections Against Overheating
  • LED Clip Indicators on each channel
  • Dimensions : 482 x 98 x 296mm
  • 1/4" Jack and RCA Inputs
  • Speakon, 1/4" Jack and Binding Post Outputs
  • Approx. Weight : 11 Kg

KAM KCA-1200 Power Amplifier
KCAAmps
  • High Quality Affordable Amplification
  • 2 x 600w Max, 2 x 300w RMS @ 4 Ohms
  • Vented Front Panel with Forced Fan Cooling
  • Thermal Protection Relay
  • Balanced XLR Audio Inputs
  • Unbalanced Jack and RCA Audio Inputs
  • Speakon and Binding Post Speaker Outputs
  • Bridge Mode Operation
  • S/N Ratio : 84dB
  • Approx. Weight : 10 Kgs

KAM KCA-1600 Power Amplifier
KCAAmps
  • High Quality Affordable Amplification
  • 2 x 800w Max, 2 x 400w RMS @ 4 Ohms
  • Vented Front Panel with Forced Fan Cooling
  • Thermal Protection Relay
  • Balanced XLR Audio Inputs
  • Unbalanced Jack and RCA Audio Inputs
  • Speakon and Binding Post Speaker Outputs
  • Bridge Mode Operation
  • S/N Ratio : 84dB
  • Approx. Weight : 12 Kgs

KAM KXR-1000 Power Amplifier
KXRAmps
  • Outstanding build quality & reliability
  • Thermally efficient central heat sink design
  • Vented front panel with forced fan cooling
  • Thermal protection relay
  • Peak signal protection
  • Balanced XLR audio inputs
  • Unbalanced ¼" Jack audio inputs
  • Speakon and Binding Post speaker outputs
  • Bridge mode operation
  • Earth lift switch
  • MIN IMPEDANCE :4 Ohms
  • FREQ' RANGE :20Hz - 30KHz
  • 500W RMS @ 4 Ohms | 340W RMS @ 8 Ohms per Channel
  • S/N Ratio 84dB | THD 0.1% |
  • Dimensions 341 x 88 x 481mm
  • Weight 12Kg

KAM KXR-1500 Power Amplifier
KXRAmps
  • Outstanding build quality & reliability
  • Thermally efficient central heat sink design
  • Vented front panel with forced fan cooling
  • Thermal protection relay
  • Peak signal protection
  • Balanced XLR audio inputs
  • Unbalanced ¼" Jack audio inputs
  • Speakon and Binding Post speaker outputs
  • Bridge mode operation
  • Earth lift switch
  • MIN IMPEDANCE :4 Ohms
  • FREQ' RANGE :20Hz - 30KHz
  • 750W RMS @ 4 Ohms | 450W RMS @ 8 Ohms per Channel
  • S/N Ratio 90dB | THD 0.1% |
  • Dimensions 416 x 88 x 481mm
  • Weight : 18Kg

KAM KXR-2000 Power Amplifier
KXRAmps
  • Outstanding build quality & reliability
  • Thermally efficient central heat sink design
  • Vented front panel with forced fan cooling
  • Thermal protection relay
  • Peak signal protection
  • Balanced XLR audio inputs
  • Unbalanced ¼" Jack audio inputs
  • Speakon and Binding Post speaker outputs
  • Bridge mode operation
  • Earth lift switch
  • MIN IMPEDANCE :4 Ohms
  • FREQ' RANGE :20Hz - 30KHz
  • 1000W RMS @ 4 Ohms | 670W RMS @ 8 Ohms per Channel
  • S/N Ratio 90dB | THD 0.1% |
  • Dimensions 416 x 88 x 481mm
  • Weight : 18.5 Kg

Peavey PV-1500 Power Amplifier
PV1500
  • 500 Watts RMS per channel into 4 Ohms, 300 Watts RMS per channel into 8 Ohms
  • 1000 Watts RMS into 8 Ohms bridged
  • LED indicators for input signal, DDT™ and power
  • 2 built-in 150 Hz crossovers
  • 40 Hz low cut filter
  • Volume control per channel
  • Dual-speed fan with Turbo V-Cooling™ technology
  • DDT™ speaker protection
  • 2U space rack
  • Dimensions (HxWxD): 90 x 483 x 394mm
  • Weight: 20 Kg
 

Peavey PV-2600 Power Amplifier
PV2600
  • 900 Watts RMS per channel into 4 Ohms, 550 Watts RMS per channel into 8 Ohms
  • 1800 Watts RMS at 8 Ohms bridged
  • LED indicators for input signal, DDT™ and power
  • 2 built-in 150 Hz crossovers
  • 40 Hz low cut filter
  • Volume control per channel
  • Dual-speed fan with Turbo V-Cooling™ technology
  • DDT™ speaker protection
  • 2U space rack
  • Dimensions (HxWxD): 90 x 483 x 394mm
  • Weight: 22Kg
 


SF